How to Flash Redmi Note 3 Pro with MiFlash – This method can be used for Redmi Note 3 Pro 2/16GB or 3/32GB. Not for Redmi Note 3 Mediatek(MTK). At the time of the Flash Process, try to use Windows 64bit. Because if Windows is 32Bit, the error “Not Enough Storage to Process this Command” can occur.
How to Flash Redmi Note 3 Pro With MiFlash Easily and Quickly
If you still insist on using Windows 32Bit, just be careful 🙂
the solution,
internet cafe
Borrow a friend’s laptop
You can also use Miflash Beta. but still “Beta”.
Redmi Note 3 Pro is a very Popular Redmi Variant. Equipped with the Snapdragon 650 Adreno 510 Chipset, the Redmi Note 3 Pro has very good performance. Even so, the price for the Redmi Note 3 Pro variant 3/32GB is only around 2.3 million.
Redmi Note 3 Pro has not officially entered Indonesia. Those circulating in Indonesia mostly use distributor ROMs or fake ROMs.
Contents hide
1. How to Flash Redmi Note 3 Pro
1.1. Related posts:
How to Flash Redmi Note 3 Pro
For those of you who use Redmi Note 3 Pro and get fake ROMs, replace them immediately.
Because, using fake ROMs there are usually lots of BUGs or errors, such as:
Usually distributor ROMs / fake ROMs have lots of errors.
Usually the Distributor ROM / Abal Abal Fingerprint ROM has a problem.
Usually Distributor ROMs / Abal Abal ROMs have lots of Ads.
Distributor ROMs / Abal Abal ROMs will not get updates from Xiaomi.
What are the possibilities that will happen if Flash ROM?
Success
Failed / Error
It could be Total Death, Error, etc.
So please follow the tutorial properly. Don’t use Windows 32 Bit. Due to frequent errors.
There are those who succeed, but it’s only people who are lucky.
Ok, continue to the Redmi Note 3 Pro Flash Tutorial with MiFlash.
Preparation :
Download MiFlash Tool – Beta Here. Then Install
Download MI Pc Suite Here. Then installed
Download the Fastboot ROM here here
Please select the file as desired
Global has Indonesian, 4G is a bit complicated. Saves battery.
Global Developer: Update every week, lots of features. Wasteful battery.
China doesn’t have Indonesian, 4G is safe. Install Google Apps manually. Save battery.
China developer: Update every week, lots of features. Wasteful battery.
Make sure the downloaded ROM has the extension “.tar” or “.tgz”. Not “.zip”.
Original data cable.
PC with windows 64 bit.
Data backup first.
Steps:
Make sure all the preparations above have been fulfilled.
Enter Download Mode, by turning off the cellphone > in off state > Press and Hold Volume Up + power > then select Download.
If the way to enter Download Mode above doesn’t work, please try the method on this link.
Open Device Manager
Right click My Computer > Properties
Then press “Device manager”
Connect HP to PC.
Our cellphone will be detected as: “QHUSB_BULK”
Right click “QHUSB_BULK” then select “Update Driver”
Then Select “Choose Browse My Computer for Driver Software”
Then look for its location in
C:\Program Files (x86)\Xiaomi\MiPhone\Qualcomm\Driver
If the “Xiaomi” Folder doesn’t exist, Install MiFlash first. The link is already there above.
If a notification appears, select “Install this Driver Software anyway”.
Wait until the Install Process is complete
If so, the driver will change to Qualcomm HS-USB QDLoader 9008 (COMX).
The letter X is a number, it is different for each person. no need to hesitate.
Now, to the most important part. Namely the Flashing Process
Make sure you use Windows 64 bit huh?
Extract the ROM file that was downloaded earlier.
If the file has the extension “.tar” please change it to “.tgz”
The way to change it is easy, right-click ROM File > Rename > Delete “.tar”, and add “.TGZ”.
If it has the extension “.TGZ” then there is no need to rename it.
The contents of the extracted file will be like this (Ignore the folder name)
Open the Miflash beta application in “C: \ Program Files (x86) \ Xiaomi \ MiPhone”
Click Browse > and select the Extract Rom result earlier.
What is selected is only up to the ROM folder.
Example: “C:\MIUI” instead of “C:\MIUI\Images”
If in case, when doing Flashing Error, Try flashing again but the selected folder reaches the “Images.
Press the “Refresh” Button
In the “Device” section, make sure it says “COMX”.
X is Number, it could be COM10, COM20, COM30. the most important “COM”
At the bottom, select “Flash All”
If so, now press “Flash” on the top right
The process will take about 100 seconds to 700 seconds.
Average 300 -500 seconds
If there is “The Operation Completed Successfully” it means the flash process was successful.
Unplug the USB, and turn on the HP
Enjoy the new ROM ?
The boot process is long. maybe around 10 -20 minutes. As long as it says “Android” at boot time. then it’s not bootloop yet. Still safe. 🙂